Elegance Ultra Seal

Berger Elegance Ultraseal Water Based Primer is formulated to resist alkali and moisture present in the new plaster surfaces. It is formulated to fill the pores, strengthen the surface and to increase the coverage of subsequent coats. It forms a tough and flexible paint film. It is for interior use only.

USES

Berger Elegance Ultraseal Water Based Primer has been designed for use on cement render concrete, lime plaster, asbestos cement sheets.

SURFACE PREPARATION

Before application of Berger Elegance Ultraseal Water Based Primer, it is essential that the surface to be painted should be dry and free from grease and dust.

APPLICATION PROCEDURE

Berger Elegance Ultraseal Water Based Primer can be applied by thinning (1:1) with water by volume for brush application (depending upon surface absorbency). For better results apply two coats of Berger Elegance Ultraseal Water Based Primer.

For previously painted old surfaces, remove all defective or poorly adhering material by rubbing with a suitable abrasive paper or stiff brush. To smoothen the surface, Berger Wall Putty can be applied after the application of Berger Elegance Ultraseal Water Based Primer.

DRYING TIME

Berger Elegance Ultraseal Water Based Primer dries within an hour and can be recoated after 2-3 hours.

COVERAGE

It covers 12-14m2 per litre per coat (depending upon the absorbency of the surface)

PACKAGING

It is available in 4 and 16 litres pack sizes.

SAFETY PRECAUTIONS

The container should be protected from extreme hot and cold temperature. It should be properly closed and kept in an upright position after use. In case of contact with eyes rinse with water and seek medical advice.