Top Super Emulsion

Description

SCOPE

Berger Top Super Emulsion is a top quality distemper. It covers more wall area than any other distempers and is therefore, very economical.

USES

Berger Top Super Emulsion can be used on walls, ceilings, old and new cement plasters, chipboards and hardboards.

SURFACE PREPARATION

New surfaces should be rubbed down with stone or sandpaper to remove nibs on the plaster. Previously painted surfaces should be thoroughly sandpapered. All surfaces should then be cleaned using a bristle brush or broom. Always ensure that the surface being painted is dry and free from flaking paint, oil, grease, etc.

APPLICATION PROCEDURE

For thinning, mix equal volumes of Berger Top Super Emulsion and water. For porous surfaces, additional quantity of water may be necessary for the first coat in order to satisfy surface porosity. All equipment and brushes, etc. must always be cleaned with soap and water immediately after use.

DRYING TIME

Berger Top Super Emulsion dries out in half an hour and can be re-coated in 1 hour.

COVERAGE

Berger Top Super Emulsion covers 12 – 16 m2 per litre per coat.

PACKAGING

It is available in 3.64 litres and 14.56 litres pack sizes.